Alternative title: How Many Prints Could a Printer Print, if a Printer Could Print Prints?
If you really just want an answer to take away and skip reading the rest of this article – then figure a penny per square inch is what it will cost you for the ink to print sublimation*. That’s a safe number that you probably won’t go wrong with, and your paper cost is simply the cost of a sheet of paper divided by how many items you get out of it. If you’d like to know the “why and how” though, then read on.
One of the most common questions I hear at trade shows and over the phone regarding sublimation is “How many prints can I get out of a set of sublimation ink?” It’s a great question that is asked in all sincerity, but one that is completely impossible to answer. I will even go so far as to say that anyone that will tell you a specific number of prints in answer to that question either isn’t being truthful or doesn’t understand the question. Why? Because everyone and every design is different. What you print and sell isn’t going to be the same thing that someone else prints and sells, plus you aren’t going to be printing the same exact design over and over again. To illustrate this, here are a couple of basic examples.
Susie prints full color, full coverage 11” x 17” size paper prints for Vapor Apparel t-shirts on her SG800 sublimation system using extended ink cartridges**. John on the other hand sells to souvenir shops, florists, does some custom work, uses standard size 8.5″ x 11″ paper on the smaller SG400 system, but prints a wide variety of name tags, belt buckles, ceramic tiles, the ever ubiquitous 11oz coffee mugs, and a few other products – all having different sizes, different types of art, and different levels of ink coverage.
In the two scenarios above, who uses the most ink? How many t-shirt prints does Susie get vs. John when he prints name tags? Any effort to answer the question would result in Susie having to print as many pages of a particular full page t-shirt design as she could before the ink ran out, and John printing out pages and pages of name tags until the ink ran out. And the end result of this particular test would ultimately be useless against any future projections, unless Susie and John only ever printed that one design. Apples and oranges comparisons like this never work.
The real problem here is with the question itself. The one people should be asking, and the one that they really want the answer to anyway even if they don’t know it, is “What’s it going to cost me to print something?” And THAT question has an answer – one that is based on 3 very simple principles and some pretty basic math.
- The Coverage Area: How many square inches are in your design?
- The Coverage Percentage: What percentage of the coverage area is printed?
- Designs Per Page: How many designs can you print on a single page?
Calculating this is a lot easier than it sounds, and the important thing here is to realize that it isn’t necessary to be absolutely precise – some rounding and fairly close guesses are perfectly fine.
First let’s figure out your coverage area. To do that, take the overall height of the image and multiply it by the width of the image to obtain the area in square inches (or centimeters, if you are using metric). You can even do circles the same way, just lower your coverage percentage estimate since the “corners” don’t really exist and are empty.
For any mathematicians out there that want greater accuracy with circles, the formula is A = π r2 (take half the diameter, times itself, times 3.14.)
Once you have the square inches in your coverage area, estimate your percentage of coverage based on a visual “best guess” of the amount of that area covered by your design. Keep in mind that light, pale colors use less ink and are thus considered to be lower coverage, while darker colors are considered higher. Open areas and white space are zero coverage. Consider light coverage to be below 40%; medium is 40%-60%, and heavy is above 60%.
Next, multiply the square inches by $0.0075 (3/4 of a cent) for typical medium coverage designs. For light coverage, use $0.005 (half a cent), or for heavy coverage, use $0.01 (one cent).
Assuming an average medium coverage design, the ink cost of our mug and ornament examples would be rounded to $0.20 cents and $0.05 cents, respectively.
Last but not least, let’s figure out what the paper cost is. Using 8.5” x 11” paper, you can fit 3 of those mug designs on one page, or 5 of the 3” ornaments. Based on the cost of a single pack of 100 sheets of our MPRES sublimation paper at $0.14 cents per page, your paper cost is under $0.05 cents per mug, or under $0.03 cents per ornament.
Add the paper cost to your ink cost, and that brings the total in ink and paper to $0.25 and $0.08 for your mug and ornament, and now you know what your items will cost you to print. That’s it!
*All calculations used in this article are based on the market standard Sawgrass HD series sublimation ink for the Sawgrass Virtuoso SG400 and SG800 series of desktop sublimation printers. Other printers, inks, and formats may result in different costs.
**The extended size ink cartridges save approximately 25% in ink cost over standard ink cartridges due to their larger capacity and lower price per milliliter of ink.